There are several different methods that a Boston upholstery cleaning professional will use to properly do their job. It depends on the material that needs cleaning, the type of fibers and the overall makeup of the particular piece of furniture.
One method that a Boston upholstery cleaning contractor will employ is the dry foam shampoo method. The main benefit of dry foam is that only a small amount of water is used and therefore the drying time is much shorter. Actually, it is about half the time of other methods. The foam is brushed into the fibers of the piece of upholstery until a full coat has been applied. This will bring the dirt to the surface and at the same time, it is dissolving any oil and grease. Once it has dried, it forms small crystals that have trapped the dirt. The last step involves vacuuming the dried crystals off the fabric. Once the job is complete, the piece will look like new!
Another method used by Boston upholstery cleaning professionals is the Bonnet method. This also uses a small amount of water and is quick drying as well. A cleaning solution is rubbed deep into the fibers, where it is allowed to saturate the particular piece of furniture. The area is cleaned a short time later using a specially designed pad that helps to absorb the dirt and grease. It does not take long for the fabric to dry. The hot water extraction method used is another way to do business. This is also known as steam cleaning. Since it uses more water than any other method, this one takes the longest to dry. It is the most effective procedure though. A high pressure solution is forced into the fabric, which loosens the dirt. Then a high-powered vacuum removes the dirty solution.
Boston upholstery cleaning professionals use a dry cleaning method as well. They use a chlorinated solvent and not water. Thus, it has a very short drying time. The solvent helps loosen any dirt or grease in the fibers. There is a concern with this procedure and that is the potential danger that using such a cleaner presents. Professionals must wear a breathing device so that the fumes are not inhaled. This way works best when the particular item is not located in the home. One final form of doing business is the dry compound method. Mixing the compound with cleaning agents and solvents and applying to the fabric by a machine that works the mixture into the fabric is how this is performed. A high-powered vacuum will remove the dirt after the compound has evaporated. No water is used and the mixture takes about fifteen to twenty minutes to dry.