A small amount of mold is not necessarily anything to be overly concerned about. However, you need to determine if the amount of mold you have is toxic or is it simply ugly and needs to be removed for cosmetic purposes. Mold remediation tips and techniques are essential in either case. You can remove most molds by yourself, but if the mold you have is toxic, then you are well-advised to seek the help of a professional who knows how to remove it safely.
Any mold releases spores into the air and these spores can be dangerous, especially for people who have allergies or asthma. So, the best thing you can do is to get rid of the mold and its source. You can do the job yourself, but keep the area covered in protective plastic and wear protective clothing such as gloves, a face mask and eye covering. Before getting started, ventilate the area well using your furnace or air conditioner, depending on the weather.
For small amounts of mold, you probably can clean it by just using a common household detergent during the mold remediation process. All you have to do is to wash the area well and use a scrub brush if necessary. Then, rinse the surface and dry it completely. Don’t allow any moisture to remain or you’re likely to have the mold return. If there is any type of dust left the next day, use a vacuum to remove it. For some surfaces, you can repaint them with a mold-resistant paint which is readily available at your local retail store.
If you detect mold inside your walls, you likely will have to take more extensive measures to remove it. If mold has seeped inside your drywall, you will probably have to replace it. And, if the wood in your wall is saturated with mold, it likely will have to be replaced also. If this is the case, you probably should hire a mold-removal expert to assist you with the job. Anytime structural damage is apparent, it is to your advantage to hire someone who has the knowledge and equipment to get the job done correctly.
The mould remediation process can be easy or complicated, depending on how severe your mold problem is. Remember to take precautions if you are doing the job yourself, being careful not to make the problem and worse than it already is. And, if your mold situation is out-of-hand, then call a professional to make sure that your mold problem is solved for good.